Spotweld Models for Advanced High Strength Steels

 

Instructions for Test Data Analysis

Instructions are copied from the project High Strain Rate Characterization of Magnesium Alloys. The process for analyzing data from the composite crashworthiness tests on this web site is essentially the same, and can be performed by following the steps below.

Step 1: Select Tests for Viewing

To analyze the data from the tests, first select the tests by checking check-boxes on the right. You can select multiple tests for comparison. Tests are grouped by material types and grades. Tests with label New include the most recent instrumentation and measurement techniques, and therefore, correspond to the highest quality test data in this project. The tests for other materials will be conducted as the materials become available.

Step 1

Once tests of interests are marked, scroll down to the bottom of the page and press select button. A quick way to scroll to the bottom of the page is to click on the hyperlink in the left column.

Select

 

Data Analysis