Functionally and Geometrically Ordered Ti Armor
Computational Models for Ti Composite Armors
2.4: Projectile Impact into Geometrically Ordered Armor Composite, Block Inserts
The following images show the simulation of the penetration of the geometrically ordered armor plate with Ti-6Al-4V material with hard block inserts in the middle, with the projectile impacting the plate at 2074 ft/sec.
Geometrically Ordered Armor Composite Plate, Quarter Inch Size Hard Block inserts
|
The armor is constructed using one plate with geometry as shown in the image above, and another backing solid plate of the same thickness that is made of Ti-6Al-4V. The block regions in the first plate are filled with the harder material, capped with the second plate and consolidated into an integral armor plate.
|
|
|
Geometrically Ordered Armor Composite Plate, Half Inch Size Hard Block inserts
|
The armor is constructed using one plate with geometry as shown in the image above, and another backing solid plate of the same thickness that is made of Ti-6Al-4V. The block regions in the first plate are filled with the harder material, capped with the second plate and consolidated into an integral armor plate.
|
|