F800 Single Unit Truck FEM Model for Crash Simulations with LS-DYNA
 
 

Description
Part Sets
Elements
Materials
Contacts
Simulations
Downloads
About
Part Sets: Frame


Frame  

  pid/sid/
mid
Description Section
type
Behavior
1 frame side members, C-sections, 2pc
2 frame cross members, 1@front+5@back=6pc
3 frame cross member at front, supports the engine
4 rear bumper and rear cross member at bed end
5 vertical posts that attach the rear bumper and the rear bed cross member to the frame side members, 2pc
6 rear suspension brackets (mounts) towards front, 2pc
7 rear suspension brackets (mounts) towards back, 2pc
8 rear suspension auxiliary brackets, towards back, 2pc
9 rear suspension auxiliary brackets toward front, 2pc
10 outside shell facings in the middle part of the side frame members, 2pc
11 portal frame stiffener spanning the frame side members, under the cross member at back of cabin bottom
12 clutch bearing, top part, 2pc
13 clutch bearing, bottom part, 2pc
14 battery box brackets, 2pc
15 tank brackets, 2pc
16 front bumper support brackets, 2pc
17 front suspension bracket mounts to the main frame, 2*2=4pc



Last Updated: Wednesday, November 30, 2005
Back to top ^^
Part Sets | Frame | Bed | Cabin | Engine| Drive Shaft
Front Suspension | Front Axle | Front Wheels | Rear Suspension | Rear Axle | Rear Wheels
Description | Part Sets | Elements | Materials | Contacts | Simulations | Downloads | About
NTRC >> | ORNL >> | Battelle >> | UTK >> | NCAC >> | FHWA >>
NTRC ORNL Battelle UTK NCAC FHWA