F800 Single Unit Truck FEM Model for Crash Simulations with LS-DYNA
 
 

Description
Part Sets
Elements
Materials
Contacts
Simulations
Downloads
About
Part Sets: Bed


Bed  

  pid/sid/
mid
Description Section
type
Behavior
1 frame side members, C-sections, 2pc
2 frame cross members, 1@front+5@back=6pc
3 frame cross member at front, supports the engine
4 rear bumper and rear cross member at bed end
5 vertical posts that attach the rear bumper and the rear bed cross member to the frame side members, 2pc
6 outside shell facings in the middle part of the side frame members, 2pc
7 portal frame stiffener spanning the frame side members, under the cross member at back of cabin bottom
8 bed rails that sit on top of side frame members, 2pc
9 truck bed
10 bottom bed Z-beams, 20pc, transversal dir.
11 added weight/mass in the truck bed
12 U-bolts that attach the bed rails to side frame members, 5*2=10pc
13 shell cap, 5*2=10pc
14 shell envelopes around U-bolts (2000158), 5*2=10pc
15 washers for shell envelopes (2000160), 5*2*2=20pc
16 discrete nonlinear spring elements (2000158, 2000159), 5*2*2=20pc



Last Updated: Wednesday, November 30, 2005
Back to top ^^
Part Sets | Frame | Bed | Cabin | Engine| Drive Shaft
Front Suspension | Front Axle | Front Wheels | Rear Suspension | Rear Axle | Rear Wheels
Description | Part Sets | Elements | Materials | Contacts | Simulations | Downloads | About
NTRC >> | ORNL >> | Battelle >> | UTK >> | NCAC >> | FHWA >>
NTRC ORNL Battelle UTK NCAC FHWA